{"id":1376,"date":"2016-05-15T18:26:49","date_gmt":"2016-05-15T18:26:49","guid":{"rendered":"\/?post_type=ht_kb&p=1376"},"modified":"2018-03-10T20:49:29","modified_gmt":"2018-03-10T20:49:29","slug":"how-to-use-the-threshold-filter-control","status":"publish","type":"ht_kb","link":"https:\/\/www.use-snip.com\/kb\/knowledge-base\/how-to-use-the-threshold-filter-control\/","title":{"rendered":"How to use the Threshold Filter Control"},"content":{"rendered":"

The Filter Log Threshold<\/em> Control is the primary means by which you can control the level of reporting details shown in the console.\u00a0 Whenever you change this setting, the log is redrawn using the new setting.\u00a0 This allows reviewing both past<\/em> and present<\/em> log events with more<\/em> or less<\/em> detail.\u00a0 This control is located above the console log and also in the menu tree.<\/p>\n

\"FilterMenu-Thresshold\"<\/a><\/p>\n

Other filter controls which are located adjacent to the threshold control allow filtering by the type<\/strong> of content<\/a> in the log which is shown, or filtering by the specific data streams<\/strong><\/a> that are shown. These controls operate in conjunction with the threshold control.\u00a0 Other articles discuss these controls in more depth.<\/p>\n

As a practical example, here is the startup text sequence used by SNIP<\/strong><\/span> displayed with the three different filter settings:<\/p>\n

Major:<\/p>\n

SNIP<\/strong>, the Simple NTRIP Caster
\n<\/span>Copyright 2010~2016 By SubCarrier Systems Corp. (SCSC), Patents Pending.
\nBuild:\u00a0\u00a0 0.8.8<\/strong> \u00a0\u00a0 of May 16 2016 at 15:00:00<\/h6>\n

Moderate:<\/p>\n

SNIP<\/strong>, the Simple NTRIP Caster
\n<\/span>Part of the DGPS tools collection, available at: \u00a0 www.Use-SNIP.com
\n<\/strong><\/a>Copyright 2010~2016 By SubCarrier Systems Corp. (SCSC), Patents Pending.
\nBuild:\u00a0\u00a0 0.8.8<\/strong> \u00a0\u00a0 of May 16 2016 at 15:00:00<\/h6>\n

Minor:<\/p>\n

SNIP<\/strong>, the Simple NTRIP Caster
\n<\/span>A Caster tool to connect DGPS Reference Stations to NTRIP Clients with multiple modes
\nSimple NTRIP supports gathering RTCM data streams in serial, tcp\/ip, and relay connection modes
\nAnd then transmitting these corrections streams to multiple end users (the NTRIP Clients)
\n– – –
\nPart of the DGPS tools collection, available at: \u00a0 www.Use-SNIP.com
\n<\/strong><\/a>Copyright 2010~2016 By SubCarrier Systems Corp. (SCSC), Patents Pending.
\nBuild:\u00a0\u00a0 0.8.8<\/strong> \u00a0\u00a0 of May 16 2016 at 15:00:00
\nForked from the ‘Row Jimmy<\/em>‘ development code base.<\/h6>\n

 <\/p>\n

\n

A summary of the three settings is as follows.<\/p>\n