The Caster and Clients tab

CasterAndClientsTab

The Caster and Clients tab is used to quickly see and control how many clients are connected, and to see and control the overall state of the Caster itself.

This tab consists of two “sides”

  • The Client Management,  covered in this article.
    Here you add user accounts to allow others (Rover devices, or NTRIP Clients) to connect.
  • The Caster Management,  covered in this article.
    Here you set the port and public IP that the SNIP NTRIP Caster will have

 

These are discussed further at the above links.

agt_back Prior Tab          Next Tab agt_forward

Was this article helpful?

Related Articles